Load Video Config File Now
Causes the Video Monitoring Software to load a video configuration file immediately. Valid video configuration file numbers are 1-10. See note below.
Enable Configuration By Timer
It will enable video configuration files to be loaded at specified times of the day. 0=disable, 1=enable.
Set Time Slot
Enter the hour of day for the time slot to be active (0-23). Enter -1 to disable the time slot. It presumes you have already configured which video configuration file to load for that time slot on the local computer from the Video Monitoring Software menu items.
Note:
You can enable Item 20, in a video.cfg file so that only the video brightness, contrast, threshold, and sensitivity are changed, and all the other program parameters are not changed, when a video.cfg file is loaded. This enables you to create several pre-set config files which can adjust the brightness and contrast of the video image when doing a remote viewing. To do so put program in Web Monitor Mode, execute Load Video Config Now on your preset file, then put program back into Web Live Mode for an adjusted remote view.